You must hire a professional air conditioning engineer to perform the air conditioning service as part of your annual property maintenance; you can also perform a few simple checks to ensure that the air conditioner runs smoothly.
Keep your air conditioner clean.
Most air conditioning issues are caused by poor cleaning, but regular cleaning of the air vents can dramatically change your device’s lifespan. The cleaner you keep your room, the less often you will need air conditioning.
Replace or clean filter
The reason your air conditioning system is equipped with a filter is both to protect the mechanics inside and to keep the air in your home or office clean. When the filter is dirty, your air conditioning system will operate more and less efficiently, which means your energy bills will be higher.
Some air conditioner filters need to be cleaned, not replaced, and vice versa. The electrostatic filter is cleaned, while the disposable paper or fiberglass filter must be replaced regularly, from once a month to twice a year, depending on the air quality in your area. Review it regularly to determine how often you should change yours.
A condenser is the part of your air conditioning system that sits outside and draws in air. If it is clogged with weeds, dead leaves, or even outdoor furniture that you store against it, your air conditioner may not perform as well as it could. Make cleaning around the unit part of your regular maintenance. It is also good to do this before air conditioning services so that the engineer does not charge you for the time spent cleaning and avoid misdiagnosing why your unit is not working properly.
Check the airflow inside and outside the unit.
After removing all obstructions from the condensing unit, ensure that both units’ airflow is strong and constant. Poor airflow may indicate a blocked coil or a defective fan in your air conditioning system. You must contact a professional air conditioning engineer to investigate the problem and propose a solution.
Switching between heating and cooling modes
If you have not used an air conditioning system for a long time, it is recommended that you do an air conditioning service. You can do a simple thing, try switching between cooling and heating modes. If your air conditioner is stuck in one position, this usually indicates a problem with the reversing valve. In this case, call a professional engineer.
Remove rust or corrosion.
Check your air conditioning system, especially the outdoor unit, for signs of rust or corrosion. If the damage is minimal, it can usually be repaired by painting with waterproof steel paint. When the rusting or corrosion is more severe, you should call a property maintenance professional. Have your engineer check for signs of rust when performing air conditioning service.
